Stereo FM band receiver with RDS decoding for mobile applications using PIC Microcontroller PIC18f452.
source of post is http://www.techdesign.be/projects.htm
arduino 24c16 16f877 rs485 18f4550 gps canspi initialize 18f4550 circuit diagram a/d led 4 digits different components of c language programs ecg amplifier 18f mcp23017 expander example pic lcd interfacing pic18f4520 program for random number generator
source of post is http://www.techdesign.be/projects.htm
- Stereo FM band receiver with RDS decoding for mobile applications.
- Continuous full RDS data output through RS232: RDS PS, PI, TA/TP/TMC, CT, TMC.
- Full Radio Text supported: 2x64 characters.
- Raw TMC data output.
- Low power operation with two AA (HR6) 1V2 Ni-Mh batteries or power supply.
- Power input range is +2.4V ... +3.0V, 50..60mA without OLED and 80..90mA with OLED.
- Runs on a PIC18F46K20 at 16 MhZ.
- Full user control (volume, tune, save preset) with a 5-way micro joystick.
- Module works as stand-alone without OLED as well.
- Optional OLED Module 1 with RGB OLED 96x64 pixels shows PS (station name), frequency, TA/TP/TMC, PI, mono/stereo, RT (2 alternating lines of radio text)
- Serial interface controlso the player may be used as a playback module.
- Analog line stereo output.
- Antenna connection, suggest use of a 30cm -> 2m wire.
- Project source code can be purchased separately.
0 comments:
Post a Comment
Hi: This is PICINF.blogspot.com comments section. Here you are requested to write your question or problems in detail. Write the question in such a way that, it have all necessary information, sothat i can understand and reply.If you want to send pictures and codes then e-mail me (rghkk@hotmail.com).Thanks.